handi-vac® squeeze bulb kit without probes or vacuum cups [hv-x] our handi-vac kits are a low cost pick-and-place tool that can go in everybody’s tool box. these tools are simple to operate: 1.select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. put the probe snuggly on the tip of the handi-vac tool. make sure that there is nodust on the rubber vacuum tip. note: our larger rubber vacuum cups can be placed directly on the handi-vac tip without using a probe. 2. gently squeeze the handi-vac bulb, place the soft suction cupsquarely on the pick-and place part, then relax your squeeze. the part is now firmly gripped. 3. move the part to where you need it and a second squeeze of the bulb releases the part. applicationsfor this tool include smt parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against. this tool can be used with any of ourrubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter. use the larger cups to pick up larger and heavier parts. for better precision in part placement see our pen-vacor pen-vac pro-series self contained vacuum pens.

---

苏州赛浦斯电子有限公司
徐勇
13706139281
苏州市新区狮山路75号