102-32 flexible, high temperature, electrically conductive adhesive description: 102-32 is a flexible, reworkable, electrically conductive, silicone pressure sensitive adhesive. the overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. this product is very resistant to flexing and creasing. some applications for 102-32 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. in addition, it can be bonded to some types of teflon® surfaces. typical cured properties: consistency smooth paste filler silver percent silver (cured) 78 crease resistance excellent volume resistance (ω-cm) 0.0001 solderable no hydrolytic stability excellent useful temperature range (°c) -70 to +260 thermal stability (°c) good to 325 thermal conductivity (w/mk) 12.07 suggested handling & curing: 102-32 is ready to use as supplied. further thinning may be accomplished by adding small amounts of toluene. prior to using, be certain to resuspend silver. apply thin film of adhesive to both surfaces to be bonded. heat for 5 to 10 minutes at 100°c and assemble while still warm. apply slight pressure to assure good mating of surfaces and formation of filet. best properties, for most applications, result when cured for 5 to 10 minutes at 160°c. add 1-2% b507 catalyst when maximum strength and chemical resistance is needed. good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°c to 180°c. end user is advised to experimentally determine temperature and time best suited for individual applications.
广州市银标贸易有限公司专注于导电银浆,x射线照影油墨,可拉伸银浆,常温银胶,fsr压力油墨等, 欢迎致电 13922125860