道路反射镜，主体由镜面板与背衬构成，其中镜面板以pc板或其它透明材料形成的一个透明面板，而该镜面板表面光滑。另在该球面板内面的圆周开口状的侧缘全域及镜面板周围约一公分的区域贴设或涂覆反光片或反光装置,再于镜面板内面作适当厚度的真空电镀处理,使该镜面板呈一镜面。the main body of the road mirror is composed of a mirror panel and a backing, wherein the mirror panel is a transparent panel formed by pc board or other transparent materials, and the surface of the mirror panel is smooth. in addition, a reflector or reflective device is pasted or coated on the whole area of the circumferential open side edge of the inner surface of the ball panel and about one centimeter around the mirror panel, and then a vacuum electroplating treatment with appropriate thickness is made on the inner surface of the mirror panel to make the mirror panel look like a mirror.
但光学产品经过镀膜是避免不了造成产品产生不良现象的。如：水汽、油汽、清洗液、擦拭液、抛光粉等，其中水汽为主要，很难用一般的方法去除干净，特别对于亲水性好、吸附力强的镜片尤其如此。我们建议是采用超声波清洗机清洗。
however, the coating of optical products can not avoid the adverse phenomenon of products. for example, water vapor, oil vapor, cleaning fluid, wiping fluid, polishing powder, etc., in which water vapor is the main, it is difficult to remove it by general methods, especially for lenses with good hydrophilicity and strong adsorption. we recommend using ultrasonic cleaning machine for cleaning.
超声波清洗机对于手工及其它清洗方式不能有效地进行清洗的工件，具有显著的清洗效果，可的达到清洗要求，清除复杂工件藏角、死角、表面等污渍。
ultrasonic cleaning machine has significant cleaning effect for workpieces that cannot be cleaned completely and effectively by manual and other cleaning methods. it can completely meet the cleaning requirements and remove stains such as hidden corners, dead corners and surfaces of complex workpieces.
这台道路反射镜超声波清洗机都能做到高质量的清洗。道路反射镜超声波清洗机还制定了专业的清洗篮，清洗篮垂直摆动±2公分，并在扫描模式运作，以便清洁。
this road mirror ultrasonic cleaning machine can achieve high-quality cleaning. the road mirror ultrasonic cleaning machine has also developed a professional cleaning basket, which swings vertically ± 2 cm and operates in scanning mode for cleaning.
道路反射镜超声波清洗机
ultrasonic cleaning machine for road mirror
道路反射镜超声波清洗机整个清洗过程由plc控制，槽体是由不锈钢材质制作的超声波清洗槽、超声波漂洗槽、慢拉槽等组成一条连续工作的装置。工作时人工把清洗蓝放到上料台上，传输系统依次把清洗蓝送往各工序，最后由上下料位下料即可。除上下料外，整个清洗、烘干过程无人工干预。整机全封闭式结构，装有可拆卸的观察检修门。
the whole cleaning process of the road mirror ultrasonic cleaning machine is controlled by plc. the tank body is a continuous working device composed of ultrasonic cleaning tank, ultrasonic rinsing tank and slow pulling tank made of stainless steel. during operation, the cleaning blue is manually placed on the loading platform, and the transmission system sends the cleaning blue to each process in turn. finally, the material can be unloaded from the upper and lower material positions. in addition to loading and unloading, there is no manual intervention in the whole cleaning and drying process. the whole machine has a fully enclosed structure and is equipped with a detachable observation and access door.
此台清洗设备的系列参数：
series parameters of this cleaning equipment:
1、超声震子数：24只/槽，每只震子功率50w。
1. number of ultrasonic vibrator: 24 / slot, and the power of each vibrator is 50w.
2、超声功率：1200w/槽。
2. ultrasonic power: 1200w / slot.
3、超声频率：40khz。
3. ultrasonic frequency: 40khz.
4、超声波输出功率连续可调，全部采用日本进口ntk晶片震子。
4. the ultrasonic output power is continuously adjustable, and all ntk chip vibrators imported from japan are adopted.
5、震板厚度为sus 2.5mm不锈钢板制作，表面镀硬铬处理，经久耐用。
5. the shock plate is made of sus 2.5mm stainless steel plate with hard chromium plating on the surface, which is durable.
全自动超声波清洗机专注行业多年,用心服务客户,您的满意就是我们的发展,详情点击：
full automatic ultrasonic cleaning machine has been dedicated to the industry for many years and has served customers wholeheartedly. your satisfaction is our development. for details, click:
关键词：超声波清洗机 清洗设备 全自动超声波清洗机