品牌安吉希可儿	是否进口否
特殊用途化妆品否	生产许可证号5465465
品牌类型精品国货	商品条形码564644
适用人群女士	适合肤质干性肤质
原料湖盐	产地中国
净含量200g/ml

化妆品塑料包装瓶常识浅谈
brief discussion on common sense of plastic plastic bottle in cosmetics
1、塑料瓶的材质通常为pp，pe、k料、as、abs、压克力、pet等。
1, the material of plastic bottle is usually pp, pe, k, as, abs, acrylic, pet and so on.
2、通常用于化妆品类容器壁较厚的膏霜瓶、瓶盖、瓶塞、垫片、泵头、防尘罩为注塑成型；pet吹瓶为两步成型、管胚为注塑，成品包装为吹瓶。其它如容器壁较薄的乳液瓶、洗涤瓶为吹瓶。
2, usually used for cosmetic container wall thicker cream bottle, bottle cap, bottle stopper, gasket, pump head and dust-proof cover for injection molding; pet blow molding for two steps, tube embryo for injection molding, finished product packaging for blow bottle. other lotion bottles and washing bottles, such as the thinner wall of the container, are flask.
3、pet材料为环保材料，具有高阻隔性，质轻、不碎特性、耐化学反抗性，透明性极强，可做成珠光、有色、磁白、透明，在装啫喱水方面应用广泛。瓶口一般为标准的16#、18#、22#、24#口径，可配上泵头使用。
3, pet materials for environmental protection material, with high barrier performance, lightweight, shatterproof properties, chemical resistance, transparency is very strong, can be made into a pearl, nonferrous metals, magnetic white, transparent, widely used in gel loading. the bottle for the general standard of 16#, 18#, 22#, 24# diameter, can be equipped with a pump head.
4、压克力材质为注塑瓶，抗化学性较差，一般不能直接装膏体，需配内胆阻隔，灌装不易太满，防止膏体进入到内胆与压克力瓶之间，以免发生龟裂，运输当中包装要求较高，因划伤后看上去特别明显，通透性高，感观上壁特厚，但价格相当贵。
4, acrylic material for injection bottle, chemical resistance is poor, it can not be directly mounted paste with liner barrier, filling is not easy to prevent my paste into between the liner and the acrylic bottle, so as to avoid the occurrence of cracks, the transport packaging requirements are higher, due to scratching after looks particularly obvious, high permeability, sense thick wall, but the price is very expensive.
5、as、abs：as透明度较好于abs，且韧性较好。
the transparency of 5, as and abs:as is better than that of abs, and the toughness is better.
6、模具开发费用：吹瓶模具为1500元—4000元，注塑模具为8000元—20000元不等，模具用不锈钢的材料比用合金材料的要贵，但耐用，模具一次出几个，看生产量的需求，如生产量较大，可选择一出四或一出六的模具，客户可自行决定。
6, mold development costs: blowing mold for 1500 yuan to 4000 yuan, 8000 yuan for the injection mold - 20000 yuan, die for stainless steel material than the alloy material is expensive, but durable, die a few, to see the production demand, such as the production of a large amount, can choose one out of four or a six mold, customers can decide.
山东菲展国际贸易有限公司
联系人： 李杰
手机：15863145888
电话：4006179117
邮箱：feizhan@163.com
地址：山东省济南市天桥区水屯路46号山东北园装饰材料批发市场9区21号
网站：http://www.feizhanmaoyi.com/
鲁商云:http://www.lushangyun.com
诺商商道系统，-专业互联网应用服务提供商：www.chinanovo.net
诺商商道系统，-专业互联网应用服务提供商：www.cn-un.net
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家

---

山东菲展国际贸易有限公司
李先生
13287748039
山东 济南 天桥区