newall dp8数显表产品特点
分体式设计，显示器采用单*信号线传输，布线更方便简单，主机与显示器的传输信号线可达几百米依然能稳定工作而不丢信号，适用于传感器与显示器的远距离传输。
主机具有分辩故障功能，使用起来更加方便直观
数显表坐标轴每轴可达100点非线性补偿，从而大幅度提升测量*度。
采用32位cpu计算机技术，使数显表处理速度更快更稳定及功能更强大。
数显表采用铸造的铝合金外壳，能有效的抵*电磁干扰、散热效果比较好、不怕强烈撞击，有效保护电子线路平稳运作。
全系列数显表的电子元件全部采用*品质芯片元件，保证计数更稳定、**力强、使用寿命长。
数显表操作面板采用双层3m面板，坚固耐用、理论使用寿命可达100万次。
数显表具有更多人性化设计功能：掉电记忆无需电池，也能长达十年记忆当前位置。
采用中国台湾明伟原装电源输入，输入电压范围ac/90v-240v都能稳定工作。
超薄式设计，体积更小更方便使用。
产品功能
寻找机床原点
100组分段性修补
100组sdm加工坐标
斜线分孔功能
公英制转换
任意点归零、置数
停电记忆
abs/inc坐标
圆周分孔
线性误差修正
坐标分钟
半径/直径转换
分辨率可调转换
苏州泽升*密机械仪器有限**销售维修更换替换newall dp8球栅数显表。
1.0 introduction
the dp8 digital readout conforms to the relevant european standards for electromagnetic compatibility and
low voltage directive as detailed below.
bs en 50081-2: electromagnetic compatibility.
generic emission standard - industrial environment
bs en 50082-2: electromagnetic compatibility.
generic immunity standard - industrial environment.
bs en 61010-1: safety requirements for electrical equipment for
measurement, control and laboratory use.
construction: two part system - display/keyboard separate from dsu/inputs
dimension display/keyboard dsu
height: 170mm (6.7in) 130mm (5.1in)
width: 295mm (11.6in) 185mm (7.3in)
depth: 30mm (1.2in) 60mm (2.4in)
weight: 2.1kg (4.6lbs) 1.7kg (3.7lbs)
operating voltage: 115 or 230v (switch selection)
supply voltage fluctuation: not to exceed +/-15% of the operating voltage
supply frequency: 50 to 60 hz
maximum power consumption: 26va
operating temperature: 0 to 45°c (32°f to 113°f)
storage temperature: -20 to 60°c (-4°f to 140°f)
inputs: dependant on model, two or three spherosyn/microsyn transducers
resolution:
spherosyn/microsyn 10 5μm (0.0002in) / 10μm (0.0005in) / 20μm (0.001in) / 50μm (0.002in)
microsyn 5 1μm (0.00005in) / 2μm(0.0001in) / 5μm (0.0002in) / 10μm (0.0005in)
environmental conditions: indoor use, ip20 (iec 529)
relative humidity - maximum 80% for temperatures up to 31°c (87.8°f),
decreasing linearly to 33% at 45°c (113°f).
transient overvoltage according to installation category ii of iec664
pollution degree 2 in accordance with iec664
newall measurement systems limited reserves the right to change specification
without notice
certificate no fm36096
iso 9001