韩国电动折弯机 产品详情
韩国电动折弯机工作原理：1.laid firmly fixed samples assigned to the base plate 2.fixed distance control:tailored to the distance spcified by moving the pusher unit fisde lever. 3.using cut height adjustment ,adjust the height of the sample push rod untill it touches the sample. 4.speed controller to specify the speed to match the volume using the lever on the grid alignment (set the table below)电动折弯机判断基准： test method test the method and order of the methods listed above settings are the same verdict standard details of samsung or ship sfec test specification must be followed equipment operation processor ac mator rotational movement of the gear by rorating the pusher the sample should be banding sample is fixed on the base .the constans power and speed pusher deflection occurs and check the changes of the resulting samples material:aiuminum /sus303/profile size:440mml*320w*500h weight:20kg electrical :220v.60hz.25w