产品简介:
leto相位调制器是基于一个反射lcos微型显示器与全hd（1920×1080像素）的分辨率。仅为6.4微米的像素间距和0.2μm的小像素间间隙的leto slm提供93％的高填充因子，从而高的光效率。
leto 空间光调制器 – microdisplay features
display type:
reflective lcos (phase only)
resolution:
1920 x 1080
pixel pitch:
6.4 µm
fill factor:
93 %
active area / diagonal
12.5 x 7.1 mm (0.55″ diagonal)
addressing
8 bit (256 grey levels)
signal formats
hdmi – hdtv resolution
frame rate
60 hz
the leto phase modulator is based on a reflective lcos microdisplay with full hd (1920 x 1080 pixel ) resolution. with a pixel pitch of only 6.4 µm and a small interpixel gap of 0.2 µm the leto slm provides a high fill factor of 93% and thereby a high light efficiency.
the leto spatial light modulator is usable for the 400-1100 nm range and the modulator provides a phase shift of 2 π up to 850 nm. the device is delivered with a linear 256-level phase response for the specified user wavelength. the adaptation of the device settings for different operating wavelengths to a linear 2 π phase response can be done by straight forward gamma correction using the supplied calibration software.
the leto spatial light modulator offers a reflectivity of ~ 75%. due to the optimized design of the lcos microdisplay the leto slm shows low cross talk between the pixels resulting in high effective spatial resolution. the device offers diffraction efficiencies of more than 80% (16 level blazed grating) which leads to a total light efficiency of ~ 60%.
special features:
- reflective lcos microdisplay
- phase only modulation
- small interpixel gaps
- 6.4 µm small pixel pitch
the leto phase only modulator devices can simply be addressed like an external monitor using the standard hdmi interface of the graphics card. no additional software or special hardware is needed to operate the slm.
leto spatial light modulator kit – contents:
leto spatial light modulator – scope of supply
leto slm driver box
phase only display incl. flex cable (1920 x 1080 pixel)
hdmi-cable & dvi/hdmi-cable
usb cable
power supply
operating instruction / manual
data medium (cd or usb flash drive) with manual, calibration software and application software
leto phase modulator – software features:
the leto phase only modulator devices can simply be addressed like an external monitor using the standard hdmi interface of the graphics card. no additional software or dedicated hardware is needed to operate the slm.
for advanced callibration the leto device uses a convenient standard usb interface and a java based gui callibration software. the software can be used to change the electrooptical response by applying a new gamma curve (to configure the device for use at a specific wavelength).
besides that, a holoeye is provided with the device. key features of which are:
computation of computer generated holograms (cgh) from user defined images
generation of slm signals representing basic optical functions such as lenses, gratings, axicon and vortex functions
superposition of cgh’s with basic optical functions to combine functionalities
leto software features
slm callibration software
brightness / contrast / geometry / gamma control
slm application software
basic doe computations; generation of optical functions (circular aperture, fresnel zone lens, axicon, single and double slit …); gratings (incl. blazed and sinusoidal)
driver dimensions (unit: mm):
display dimensions (unit: mm):
订购信息：
请联系我们的销售人员
email: sales@waveopt.com
北京波威科技有限公司
18515635158
中国 北京