用途：印制线路板数控钻工艺定位孔钻孔及装销钉的专用设备
purpose：for printed circuit board nc drilling and pin installation
特点：1.采用日本三菱可编程序器（plc)控制性能稳定，安全可靠，质量达到国外同类产品水平;
2.钻孔主轴采用中频电主轴，具有转速高、噪音低、钻孔精度好、使用寿命长等特点;
3.钻孔装销钉一次完成，销钉高度可任意调节
feature:
1.mitsubishi plc controling, stable, safe and reliable;                                                                        2. drilling spindle with if elctrical spindle, is of high speed, low noise, fine drilling accuracy and long service life;                                                               3.drilling and installation done once, pin height is adjustatble.
.
主要参数：technical data
主轴转速 speed of main shaft
24000r/min 无极可调stepless adjustable
中频电源 inverter
进口变频器 imported transducer
可钻孔印制板 production size
最大尺寸max size: 760x760mm
最小尺寸min size: 200x150mm
电源及功率 power supply
单相 220v 50hz 0.8kw
气压及耗气量 air pressure
5kgf/cm²  0.15m/min
设备外形尺寸 machine size
1130x680x1640mm

---

东莞市耀发机械设备有限公司

13798710567
中国 东莞