精密脉冲点焊+恒流恒压充电+充电宝测试
788h-usb版本是sunkko根据移动电源组装生产而在原788h基础上研发之产品，对于移动电源组装后的充电进行测试老化，以此来检验移动电源内的充电电路是否能正常工作、充电电流数值的大小，以及移动电源的电路板是否有安装充电保护功能（既防止电池过充损坏功能）;
788h-usb版本同时适应手机、平板电脑的电池维修后的充电测试及老化测试之用途,同时具备了3个标准5v 3ausb输出充电口,适用于具备快充2~3a电流的智能手机、平板电脑、移动电源等作实际充电电流的测试；
特点：
1. 精密点焊、锂电池测试、充电一体机；微电脑控制多达199级（99*1；99*2）精密焊接参数设置；具备单脉冲和双脉冲的超快速焊接选择模式；
2. 兼备旋钮式快速设置脉冲群（16脉冲）大电流慢速焊接模式，适合较厚电池镍片焊接；
3. 具备脚踏式焊接触发开关制，提高焊接准确度和焊点质量；
4. 788h-usb增强版,全球独创焊针焊接led高亮照明装置,点焊操作一目了然。
5. 独具专业焊机的焊接压力调节器,方便焊接不同工件。
6. 具备高达4.2v~36v或3a的可调充电装置，满足极大部分锂电单体或组合的焊接后充电或测试；专为移动电源组装后测试充电电流而设的3孔3ausb输出充电测试装置；高精度4位+3位电压电流显示表头。
7. 788u对店铺进货后的充电宝商品作充电测试，图中显示充电电压为5.01v。充电电流为0.79a
8. 788u对店铺进货后的充电宝商品作售前充电测试，图中显示为5.02v，充电电流为0.18a，意味着两台充电宝即将充满电池。
9. 788u独特的三位usb输出口，输出能力为3a，可同时为三个充电宝作充电老化及测试用途，图中显示三个刚组装好的充电宝充电电压为4.48v。充电电流为2a.
10. 788u专为充电宝组装焊接及充电测试之用，图中其充电电源对充电宝并联焊接后作充电测试。测出电池组充电电压为3.35v，充电电流为2.07a。
power bank assembly charge tester work station
preciston pulse spot welder+cc-cv charge+power bank test
product features
* this spot welder is contains preciston pulse spot welder , lthium battery
test and charge three in one;
* micro-computer control up to level 199(99*1;99*2),precision parameter setting;
* there have one or two pulse to choose to faster welding;
* it have two current setting to fast set welding current.the maximum up to
16 pulse.suit for welding thicker material.
* the charging part has 4.2v-36v to continuously regulated,it satisfied for
most single and assembled battery to charging and testing.
* that have 3 microusb,special for power bank、tablets and smartphones charge.
* the welder have pedal welding trigger switch system,improve the accuracy and
quality of welding;
* unique professional welding pressure adjuster,that's convenient to weld different
work piece.
* high precision 4 bit +3 bit voltage current indicator.
788h-usb is based on 788h to design the battery point welding machine for the mobile power in assembling and producing. it's measuring and checking included battery charge, charging current value and circuit board with charging protection function in mobile power.
788h-usb can be used in the battery of mobile phone and tablet computer after repairing for charging test and aging test.788h-usb contains 3 standard 5-volt usb outlets and the largest output electric current is 3a. it is suitable for mobile phone and tablet computer and mobile power which is with 2~3a quick charging function.
test the power bank charge charge current
1.788u tests 1 mobile power. charging voltage is 5.01v and charging current is 0.79a as shown in the picture.
2.788u tests 2 mobile powers in the same time. charging voltage is 5.02v and charging current is 0.18a as shown in the picture.
3. 788u has 3 usb outlets and tests
3 mobile powers in the same time. charging voltage is 4.48v and charging current is 2a as shown in the picture.
4. 788u is for mobile power assembling welding and charging.as shown in the picture the machine test the mobile power that the charging voltage is 3.35v and charging current is 2.07a.
佛山市美利德电子有限公司
18988514806
中国 佛山