德国bach巴赫进口衬胶隔膜阀
德国bach巴赫进口衬胶隔膜阀概述:introduction of germany bach bach inlet rubber lined diaphragm valve:
衬胶隔膜阀是一种特殊形式的截断阀,出现于20世纪20年代。它的启闭件是一块用软质材料制成的隔膜,把阀体内腔与阀盖内腔及驱动部件隔开,故称隔膜阀。rubber lined diaphragm valve is a special form of cut-off valve, which appeared in 1920s. its opening and closing piece is a diaphragm made of soft material, which separates the inner cavity of the valve body from the inner cavity of the valve cover and the driving part, so called diaphragm valve.其最突出特点是隔膜把下部阀体内腔与上部阀盖内腔隔开,使位于隔膜上方的阀杆、阀瓣等零件不受介质腐蚀,省去了填料密封结构,且不会产生介质外漏。衬胶隔膜阀专用于控制非腐蚀性或一般腐蚀性介质,阀体内腔表面无衬里或覆有可供选择的各种橡胶、适用于不同工作温度和液体管路。
适用温度:≤85℃、≤100℃、≤120℃、≤150℃(按照衬里和隔膜材料)
德国bach巴赫进口衬胶隔膜阀的定义: germany bach bach inlet rubber lined diaphragm valves:
1.弹性密封的开闭件,确保没有内漏;
2.流线型的流道,使得压力损失小;
3.没有填料函,因此没有外漏;
4.阀体与盖被中间隔膜隔开,使得隔膜上方的阀盖,阀杆等零件不受介质侵蚀;
5.隔膜可更换,维护费用低;
1. the opening and closing parts of the elastic seal, ensure no leakage;
2. streamlined flow passage, which makes the pressure loss smaller;
3. there is no stuffing box, so there is no leakage;
4. the valve body and cover are separated by the middle diaphragm, so that the valve cover, stem and other parts above the diaphragm are not subject to medium erosion;
5. diaphragm replaceable, low maintenance costs;
6.由於密封件为富有弹性的橡胶隔膜。因此还具有较好的密封性和最小的关闭力。
7.视胶隔膜阀的阀体内腔表面视复有厅供选择的多种橡胶。因此具有优越的耐腐蚀的特点。
产品名称: 进口衬胶隔膜阀
产品型号: bach-a
驱动方式: 手动
连接形式: 法兰
结构形式: 屋脊式
密封结构: nr、epdm、nbr、si、fpm、cr、iir
压力范围: 1.0-2.5mpa
公称通径: dn15-300
常用材质: 铸铁、铸钢、不锈钢
标准 :阀门尺寸标准:din en558-2005阀门试验标准:din en12266-1-2003阀门交货标准:din3230-2-1974工业阀门标准:din en 1171-2003法兰阀门标准:din en 3202-1977焊接阀门标准:din en 3202-1982对夹式连接阀:din en 3202-1979内螺纹连接阀:din en 3202-1977可以提供美国:api、ansi等标准