热浸塑电缆穿线保护套管
电力热浸塑钢管可以用在消防、电缆穿线管等领域。它的工艺基本如下，先将普通钢管经过一些列前处理包括倒角去毛刺、端面整平、喷砂除锈等，接着预热，使温度达到220℃，然后将预热好的钢管进行静电喷涂或浸塑在聚乙烯粉末中，如果产品喷涂的是环氧树脂则需要送往固化炉固化，固化温度要求达到280℃左右，四小时后即可取出产品，*经过修补，即产品加工完成。加工工艺中要注意的细节也非常多，比如涂塑层要均匀，每一处地方都要喷涂到，浸塑时间的控制等，要想把该产品做好要选择优质的环氧或聚乙烯粉末，然后需要有先进的工艺技术，*要有先进的设备支持。electric heat-dipped plastic steel tubes can be used in fire fighting, cable threading pipes and other fields. its process is basically as follows: firstly, ordinary steel tubes are pre-treated by some columns, including chamfering and deburring, end face flattening, sand blasting and derusting, and then preheated to reach 220 ℃ and then the pre-heated steel tubes are electrostatically sprayed or impregnated in polyethylene powder; if the products are sprayed with epoxy resin, they need to be sent to a curing furnace for curing, and the curing temperature needs to reach 280 ℃. after four hours, the products can be taken out, * after repair, that is, the products are processed and finished. there are many details to be paid attention to in the processing technology, such as uniform coating, spraying everywhere, control of plastic soaking time, etc. to make this product, high-quality epoxy or polyethylene powder should be selected, and then advanced processing technology * should be supported by advanced equipment.
电缆穿线用热浸塑复合管厂家，我公司是河北大型的热浸塑钢管生产厂家,电缆穿线管用热浸塑钢管,热浸塑电缆穿线管,热浸塑钢管,热浸塑穿线管,电力浸塑钢管,矿用涂塑复合管,环氧树脂复合钢管,冷水用衬塑钢管和热水用衬塑钢管以钢管为基管，采用改性环氧树脂粉末对其内外壁进行涂敷的管道。其涂塑层与钢铁有极强的结合力，很强的耐腐蚀性，减阻、防腐、抗压，抗菌等作用，具有良好的耐化学稳定性和耐水性。thermoplastic composite pipe manufacturer for cable threading, our company is a large manufacturer of thermoplastic steel tubes in hebei province. thermoplastic steel tubes for cable threading, thermoplastic cable threading tubes, thermoplastic steel tubes, thermoplastic threading tubes, electric plastic-impregnated steel tubes, mining plastic-coated composite pipes, epoxy resin composite steel tubes, cold water plastic-lined steel tubes and hot water plastic-lined steel tubes are based on steel tubes, and modified epoxy resin powder is adopted to coat the inner and outer walls of pipes. its plastic coating has strong binding force with steel, strong corrosion resistance, drag reduction, corrosion resistance, compression resistance, antibacterial and other functions, and has good chemical stability and water resistance.