technicalinformation
covering
injected polyurethan, hardness 55 shore d.
wheel centre body
polyamide-based technopolymer (pa). resistant to solvents, oils and other chemicals.
bore
directly made into the centre.
axle set
calibrated zinc-plated steel precision tube. the tube serves as a spacer, is tightened to thebracketwith screw and nut to a un predetermined torque value.
the wheel bore rotates onto the tube freely.
turning plate bracket
electrolytically zinc-plated steel sheet bracket. 
the presence of two ball turns and the direct contact between the plate and the ball race ring with built-in pin ensure excellent manoeuvrability and very limited clearance.
front-actuated brake
total brake that locks the wheel and bracket rotation. the optimised dimensions and theretractiblepedal ensure minimal space occupied and maximum actuation ease.
standard executions
- sbl-g: turning plate bracket, without brake.
- sbf-g: turning plate bracket, with brake.
- cbl-g: turning plate bracket and threaded centre pin, without brake.
- cbf-g: turning plate bracket and threaded centre pin, with brake.
- fbl-g: turning plate bracket and centre pass-through hole, without brake.
- fbf-g: turning plate bracket and pass-through hole, with brake.
applications
wheels for the general public with high carrying capacity, excellent smoothness andelasticityfeatures, good wear and tearing resistance.
environmental conditions
re.c6 twin wheels are suitable for use in industrial and institutional environments, even inthepresence of moisture and chemical agents.
the good resistance to frequent cleaning cyrcles makes it suitable for environments where it is necessary to ensure hygiene.

---

南京耐思特机电设备有限公司
陈子明
13382010806