1250s型离子风棒是目前最有效，安全性最高的静电消除方式之一，与9050-4型静电发生器配合使用，静电消除率高达98%，在效工作距离高达150mm。广泛应用于包装，印刷，塑料，医药等行业，其特别的保护电路设计可以有效减少打火现象，并杜绝工作时电击操作人员的危险现象，其采用进口放电针，寿命大大延长，消除率保持时间更长久。单支离子棒长度可达4000mm，每个静电发生器可连接4支离子棒，总长度可达16000mm,其采用一次成型的铝合金型材为固定外壳，美观大方，安装更简易，采用进口高压屏蔽线确保不会对其他电路采用干扰，离子棒全体密封，防潮防尘，从根本上杜绝短路等危险事故的发生，清洁亦更为方便，只需要用软毛刷或软毛牙刷即可完成清洁工作，省时省力。特别适用于环境恶劣和高速度高要求的设备之上，如涂布，复合，凹版印刷，分切机，印刷机，流延，挤出，双拉，横切，包装，制袋，吹膜，淋膜等设备上
1250 /1250-s ds iss 1
how it works:
the 1250 works by applying high voltage to an emitter inacontrolled
and safe way. the electric field around the emittersionisesthe
air - breaking it up into positive and negative ions. theseionsneutralise
static electricity by being attracted to charges of theoppositepolarity.
unused ions quickly dissipate into the atmosphere.
1250 / 1250-s
static eliminators
powerful performance and
market-leading reliability make the
1250 and 1250-s the first choice
static eliminators for major
manufacturers
the 1250 and 1250-s neutralise static electricity on sheet,weband
similar processes throughout the plastics, packaging,convertingand
related industries. they are equally suitable forfood,medical,
pharmaceutical and many cleanroom applications.
benefits and advantages
peformance
• the modern design gives high performance and completelyshocklessoperation.
• stay-sharp etched emitters for better long termperformance.
• emitters at 10mm pitch provide the most intense field ofstaticneutralisation.
• advanced hi-flex polyurethane covered cable, rated at30kv,suitable for
processes from robots to high speed machinery.
reliability
• all electronic components are fully encapsulated formaximumreliability.
• robust construction ensures a long life of highperformance.
ease of use
• simple to install - with fixed mounting studs (1250) orstudssliding in slot (1250-s).
• operating distances of up to 150mm, best distance 20 -50mm.
• washable and easy to clean.
• wide range of options to extend usability. see next page.
technical specification
1250-s
the 1250-s has m4 x 20mm hexagon
head mounting studs which slide in a groove
on the underside of the bar.
this gives fast and simple installation.
1250
the 1250 has fixed m4 x 20mm studs
positioned 20mm from each end, and in the
middle for longer bars.
length: from 60 mm to 6 m.
construction: anodised aluminium, epoxy resin, pvc andhardenedetched
emitters.
cable: hi-flex polyurethane covered, 30kv screened cablewith25mm
bend radius. standard length is 2m - longer lengths up to a
maximum of 10m can be specified at time of order (subject to
maximum load on power unit)
90° cable exit option. bars may be supplied in series -joinedby
cable
power unit use with fraser 5.5kv power units - seedatasheets.
safety: 5ma maximum current from power unit. highvoltageresistance
inside bars further limits current below 50μa.
mounting: see sketches below to show 1250 and 1250-soptions.200mmx
20mm steel fixing strips are supplied with each bar.
temperature: 60°c
standards: ce.
ul (us and c) listing is a free of charge option.
variants
ex - atex for hazardous areas see ex-1250 datasheet.
airboost for extending the range up to 500mm, see1250-abdatasheet.
balanced: for high tech applications where an accurateelectricalion balance
is required, see 1250-50 datasheet.
high charge: see super 80 datasheet - considered by many to bethemost
powerful static eliminator bar of its type available.
combination: a passive static discharger may be combined witha1250, for
speeds over 1000m/min.

---

广州市拓必森机械设备有限公司
彭先生
13710141707
蚬涌工业区