产品名称：psi速成钢胶棒
psi fast steel rod
产品说明： product description
应用范围：
速成钢胶棒是一种钢加强型修补剂，可对钢、铁、铝等金属材料的容器、管道和一些零部件上出现的漏孔、裂纹、砂眼、缺陷、断裂、损坏等进行填充与粘接。此外它还能迅速制作、复制零件、模型、样板，修补剥落的螺纹及作为螺母、螺栓紧固后的固定、密封和其它各种形式的安装固定等。其粘合力优异，固化后强度高、硬度好、不收缩、不锈蚀，可以和补修补的本体材料一样进行钻、锯、锉光、喷漆和机械加工。
 applications:
quick steel is a steel reinforced glue stick putty can be of steel, iron, aluminum and other metal materials, containers, pipes, and some parts appear on the leak, cracks, blisters, defects, breakage, damage, etc. filled with bonding. in addition, it can quickly create, copy parts, models, model, repair of spalling as a nut and screw, bolt, after the fixed, seals and other forms of mounting and so on. its excellent adhesion, curing, high strength, hardness, does not shrink, does not rust, the body can repair and make the same materials for drilling, sawing, filing and light, painting and machining.
使用方法：
使用前，须将要修补处周围的浮锈、尘土油渍等浮着物清理干净。取出塑料管中的胶体，切下所需用量，将胶体内芯与外皮两种不同颜色的材料用手充分揉合成一色（约1-2分钟）直到均匀为止。将其用力压实粘牢到修补处并尽量挤压到孔洞和裂缝之中。混合后的粘合剂会很快反应，3-5分钟后胶体开始微微发热固化，10-20分钟后既可非常坚硬。其固化前胶泥状的形态使用时不滴落，不流淌，使用非常方便。冬天寒冷地区使用，应将胶体和待修补表面适当加热至室温或稍高于室温。
 method of use:
before using, must repair place around the rust, floating dust owing to clean up things. remove the plastic pipe, cut for dosage gel, colloid and skin two different darkened color material by hand with fully into color (about 1-2 minutes) until evenly so far. will the force compaction cement to repair place and try to squeeze holes and cracks in. the mixture of adhesive wills soon reaction, 3-5 minutes after the colloid began to slightly, and 10-fever curing after 20 minutes as can be very hard. the curing of the use form before daub shape when not to drop, not flow, use very convenient. winter cold areas use, should be to repair the surface and colloid will proper heating to room temperature or a little higher than at room temperature.
主要性能指标：
 
名称
name
指标
index
测试标准
test standard
可操作时间
operating time
3-5 minutes
 
耐温极限
temperature limit
121℃（可连续工作）121 ℃ (can work continuously)
149℃（可间歇工作）149 ℃ (batch work)
 
 
24小时固化硬度
24 hours curing hardness
shore 75-85d
astm d2240
 
粘接拉伸强度
bonding tensile strength
5.5-6.9mpa (56.1-70.38kg/cm2)
astm  d1002
抗压强度
compressive strength
67-97mpa (730.8-989.4kg/cm2)
astm d695
耐化性能
chemical resistance capability
耐油脂、酒精、酮、烃及酸、碱、盐溶液
oil resistance performance of alcohol, ketone, hydrocarbon and acid, alkali, salt solution
ul 698
收缩率
shrinkage rate
less than 1%
astm d2566
表面电阻
surface resistance
30,000 mω
astm d257
绝缘强度
dielectric strength
11.8kv/mm
astm d149
不挥发物含量
non-volatile matter content
100%
 
固化后的颜色：灰色，有金属光泽
生产商：      美国
包  装：
重  量：      114g/支，12支为一盒，24支为一箱
存放期：      *使用期12个月，2-3年仍可继续使用。

---

靖江市君扬节能科技有限公司
苏章萍
18994628600
靖江市城北园区山南路18号