人体综合测试仪 surpa-6505
modelno.：surpa-6505
this instrument is produced according to iso/cd8782-1standard,can test ground resistance of hand & foot, there isleddisplay& alarm. it is an absolutely necessary tester instaticcontrolindustry. surpa-6505 uses 9v battery , low voltageandsafety. usercan easily adjust the height of tester.
operation：
一.testesdshoe/heelgrounder:
dial”selective switch”to”foot wear”,then stand onthetestingboard after wearing esd shoes,press”press totest”key.inthisway,left light will display the ground resistance ofthe leftfootwearing esd shoe & right light will show thegroundresistanceof right foot wearing the esd shoe.
testing value sheet
range               item
leddisplay
anti-static shoes
alarm voice
hi
r＞100mω
yes
pass
r≥750kω
r≤100mω
no
low
r＜750kω
yes
lowbatt
voltage<7v,pleasereplacebattery
一、      testingwriststrap,anti-static shoes/heelgrounder
  dial “selectiveswitch”to“wrsitstrap”&footwear” key,connect wrist strap andplug socketoralligator clip into the outlet,then press”presstotest”key,thevalue shown on the top middle place is thewriststrapresistance.
testing value sheet
range   item
leddisplay
footwear
wrist strap
alarm voice
hi
r＞100mω
r.＞10mω
 yes
pass
r≥750kω
r≤100mω
r≥750kω
r≤10mω
no
low
r＜750kω
r＜750kω
yes
lowbatt
voltage<7v,pleasereplacebattery
人体综合测试仪 surpa-6505
how to fix:
(1)toloosesleeve, and insert bracket through testing board andscrewsleeve.as the chart a.
(2)toseparatelyfix up the linking lines on the two sides oftestingboard andfasten the bracked on the board. (please well note:twolinesseparately correspond to two testing loops and thelinesaredifferent from the color, the blue is for the left andblackforright.)
     (3)tofastentester batholith on the bracket and fetch the linkinglinesout. asthe chart b.
(4) toinsertthelinking lines into the jack of tester, as the chart c,thebluelies on the left and the black is on the right. thatisok. as the chart d.
how to adjust height:
to contrarotate sleeveforseveralcircles, and adjust the bracket to the good height,thenscrew thesleeve.
hanging installation:
in ordertosavetime, we can use hanging installation.  to takethetesterout, and use another set of lines. please installlinesaccordingto mark, another ender of line link to thesoleplate.there are twonails with 86mm of distance on the wall. theuser canhang thetester on the nails.
attention:precision witin +15%,adjustableprecisionresistancebox to make calibration.

---

苏州恒之润静电控制有限公司
龚先生
13962162491