rdo制氧机分离空气主要由两个填满分子筛的吸附塔组成,在常温条件下,将压缩空气经过过滤,除水干燥等净化处理后进入吸附塔,在吸附塔中空气中的氮气等被分子筛所吸附,而使氧气在气相中得到富集,从出口流出贮存在氧气缓冲罐中,而在另一塔已完成吸附的分子筛被迅速降压,解析出已吸附的成分,两塔交替循环,即可得到纯度为≥90%的廉价的氧气。整个系统的阀门自动切换均由一台电脑自动控制。psa制氧机因为其显著的优点而被广大用户所青睐,它广泛地应用于冶金助燃,化工、环保、建材、轻工、医疗、水产养殖、生物技术、污水处理等领域。 2,技术指标 氧气产量:5-200nm3/h 氧气纯度:93%--95% 氧气压力:0.2-0.3mpa 露点:--40℃(常压下) 3,备注, 本套系统氧气出口压力一般为0.2-0.3mpa,通过增压灌装系统后压力为:0.5-16.0mpa,详细技术环节,请拨打我公司24小时服务热线咨询: 86-(0),或者请我公司相关人员现场交流或者由销售内勤寄发详细相关资料。 1,oxygen generator principles: psa oxygen generator uses zeolite molecular sieve as sorbent, produces oxygen by making use ofthe psa principle. under certain pressure, zeolite molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. plccontrols pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.2,technical target 1. compressed air pressure: 0.6-1.0mpa 2. yield: 3--200nm3/h 3.purity:90%--95% 4. nitrogen outlet pressure:0.2-0.3mpa 5. dewpoint≤-45℃ 6,consumption: nm3/min 3,note: the set of the system outlet pressure of oxygen isgenerally 0.2-0.3mpa, through the pressurization system after the filling pressure :0.5-16 .0 mpa,.detailed technical aspects, please call our company 24-hour service hotline : 86 - (0) ,or asked me to the company related to the exchange of personnel on-site or by selling back-office to send more relevant information.

---

富阳瑞德气体设备有限公司销售二部
陈月
15857139965
浙江省杭州富阳市高尔夫路168号