features: heavy duty stainless steel structure made by 10 gauge ( 3 mm) thick ss304 sheet. it provides a clean, air-tight, controlled environment for a wide range of researching processes in materialscience, chemistry and semiconductor and related industries. vacuum flanges are included and allow glove box go higher vacuum to remove moisture and oxygen and operate under negative pressure withoutexpensive inert gas purging six gloves ports for easy operation by multi-person operation ( three in front and another three in back ) transparent front panel with dimension 38 lx 24w, and you maytake off wind to put in your device into chamber. all necessary accessories are included and ready to use larger airlock transition chamber (340 mm diameter x 400 mm length) three rubber glove withclamps, and sealing flanges one vacuum gauge is installed in airlock chamber 2 sets gas inlet/outlet with 1/2 ball valve built in airlock 2 sets kf25 port are built in back of glove box chamber 4sets kf40 port are built in back of glove box chamber for connecting to gas purification system power extension (4 plugs) built in glove box to allow you operate device up to 1500w inside glove boxone bottle of vacuum grease is included to get best sealing of the o-ring. technical specifications glove box dimension: 1200 mm w x 600mm d x 900 mm h air-lock chamber: 340 mm diameter x 400 mmlength ( 13.4 dia. x 16 l) glove port size: 145 mm diameter ( 5.7 ) front window size: 1050mm l x 600 mm w vacuum pressure: in airlock chamber: up to 0.05 torr (0.067 mbar); in all glove box: upto 0.5 torr (0.67 mbar) (note: the glove box is not designed for ultra-high vacuum. stainless steel case may deform at higher vacuum) positive pressure: max: 1.1 atm (note: gloves can not work ifpressure is higher that 1.1 atm 810 torrs) inert gases pressure maintain: > 12 hours main chamber leakage rate:
上海伍可工贸有限公司
文先生
13671853248
中国 上海 松林路357号23层