epon™ resin 1009f
product description
epon™ resin 1009f is a very high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-a. this resin is used extensively as a vehicle or binder in high performanceindustrial baking type surface coatings. in these coatings the epon resin 1009f is usually combined with urea-formaldehyde or phenol-formaldehyde resins to achieve the desired film properties.coatings of this type exhibit outstanding flexibility and adhesion plus exceptional resistance to chemicals and solvents. some typical applications of epon resin 1009f/urea-formaldehyde orphenol-formaldehyde coatings include linings for metal containers, appliance primers, metal furniture finishes and wire coatings. this resin also finds application in powder coatings.
benefits
if desired, epon resin 1009f can be supplied in very large lots (greater than 100m pounds) with uniform properties.this resin is extremely clean. it is substantially free from extraneous materials, especially for a high molecular weight polymer of this type.epon resin 1009f exhibits extremely low color for a resin of this molecular weight.
sales specification
property
units
value
test method/standard
weight per epoxide
g/eq
2,300-3,800
astm d1652
viscosity at 25°c
cp
100-250
astm d445
color
pt-co
200
astm d1209
typical properties
property
units
value
test method/standard
melting point
°c
130-140
astm d3461
esterification equivalent weight1
220
weight per gallon @ 20 °c
lbs
10.3
flash point, setaflash
°f
>200
astm d3278
bulk density
lbs/ft3
36-40
hydroxyl content
0.32-0.34
sodium content2
ppm
0-2
1grams of resin required to esterify completely one gram-equivalent of monobasic acid, e.g., 280 grams of c18 fatty acid or 60 grams of acetic acid
2plant method hc-692a determination of sodium in epon resins - mibk solutions (extraction-ion selective electrode method)
processing/how to use
identification and classification
chemical abstract service registry number:25036-25-3 (epa/tsca inventory designation)
msds number:187
chemical designations:
• 2,2-bis(p-glycidyloxyphenyl) propane condensation product with 2,2-bis(p-hydroxyphenyl) propane and similar isomers.
• phenol, 4,4’-(1-methylethylidene)bis-, polymer with 2,2’-[(1-methylethylidene)bis(4,1- phenyleneoxymethylene)] bis(oxirane) .
structural formula, base resin:
packaging, storage and shipping
• epon resin 1009f is a stable material produced in flake form and packaged in a 50-pound net three ply natural kraft paper bag. the product is not prone to sintering or “blocking”. it should bestored in a covered area protected against moisture.
• epon resin 1009f is also available in flexible intermediate bulk containers (flbcs) holding 2000 pounds net of solid resin. the weighing accuracy of a 2000-pound container is +/-0.5 percent.
• epon resin 1009f is not a hazardous material according to the department of transportation regulations (code of federal regulations, title 49).
fda status
for further information on the fda statusof our products, please refer to our application bulletin - fda information indirect food contact applications.
safety, storage & handling
please refer to the msds for the most current safety and handling information.
please refer to the momentive web site for shelf life and recommended storage information.
exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protectiveclothing and equipment, and adherence to proper handling procedures.none of these materials should be used, stored, or transported until the handling precautions and recommendations as statedin the material safety data sheet (msds) for these and all other products being used are understood by all persons who will work with them.questions and requests for information on momentivespecialty chemicals inc. (momentive) products should be directed to your momentive sales representative, or the nearest momentive sales office. information and msdss on non-momentive productsshould be obtained from the respective manufacturer.
packaging
available in bulk and drum quantities.
epon1001f：固体环氧树脂，当量525-550，熔点75-80℃，耐化学性，韧性，密着性。
epon1004f：固体环氧树脂，当量800-950，熔点95-105℃耐化学性，韧性，密着性。
epon1007f：固体环氧树脂，当量1700-2300，熔点120-130℃，耐化学性，韧性，密着性。
epon1009f：固体环氧树脂：当量2300-3800，熔点130-140℃，耐化学性，韧性，密着性。
因迈图环氧属于规格品，恕未能免费提供样品，若您需要订购样品或散货， 请来电或旺旺沟通洽谈！
其他交易事项和技术参数未尽说明的，也请来电或旺旺沟通洽谈！

---

佛山市尚河贸易有限公司
林敬良
18620055828
广东顺德区北滘镇广教社区居民委员会南源东路3号深业城8栋2318单元