产品说明  introduction
设备基本结构：一、自动进料成型冲孔切断卸下机构。二、调直部份采用能：上、下、左、右调动保正滑轨质量标准，方便技术人员的调动。三、采用编程控制器（hlp或jdia）控制。四、效益分折：6—16米/1分钟，损耗少。equipmentbasic structure: 1, automatic feed, forming, punching, cutting,unloading. 2, transfer straight over to the right part of themobilization of slide quality standards. convenient mobilize. 3,using programmable controller (hlp or jdia). 4, 6-fold benefitsub-16 m / min, less wear and tear.
特点:1、本机融入我厂多年来的设计、制造经验，先进的设计理念及加工工艺。2、采用数控设备加工，提高滚轮尺寸精度。3、由于设计合理、准确，且加工的精度高，使设备稳定性好，生产出来的产品稳定、精度高。4、采用冲床省电，有提高生产效率，长度定位准确。5、整体自动控制，操作方便，效率高。6、冲孔可一次冲出跟切割断加压型。
主要工艺流程：卷料被动放料→进料导料→滚压成型→校直→液压定长切断→卸料。整个过程自动完成
characteristic：
1.thismachinery is integrated into the design and manufacturing formany years of our experience, including the design concept andadvanced processing technology.
2.usingthe numerical control processing equipment, improve the roller sizeprecision.
3.owingto the reasonable design、accurate,and the processing precision is high, so that the equipment is goodin stability, out of the product of high precisionand stability.
4.ourproducts through energy saving, improve production efficiency, andthe length positioning of the products areaccurately.
5.ourproducts can totally automatic control, convenient operation, highefficiency.
6.ourmachinery can produce many type of products, such as cut off typeand pressure type.

---

揭阳市榕城区鑫润金属加工机械厂
赵然
13539279069