- 拉伸强度:0.58
- 产地:深圳
- 品牌:其他
- 外观:细腻均匀有光泽
- 密度:0.99
- 伸长率:240
- 剪切强度:0.6
- 贮存期:9个月
- 固化条件:室温固化
- 固化时间:24
- 耐水性:有
“美氏m6478”中性硅酮密封胶是一种中性固化的高性能密封胶:
1)不腐蚀基材;
2)固化收缩率低;
3)在低温(-45℃)至高温(+164℃)内保持弹性;
4)柔软抗震,耐变形;
5)适合于玻璃,铝材,石材,混凝土,砖瓦,陶瓷,塑料间的非结构性粘结密封:
6)在铅、镉等六项有害物质的含量上达到了rohs指令的要求,可以在欧盟范围内进行销售。
说明:
1)施工温度在5℃~40℃之间;
2)用两块布法清洁基材;
3)将胶嘴按需要的大小做45°切断;
4)将胶打满接缝处。
重要:
1)使用前请做材料相容性测试;
2)不用于结构性装配或表面温度(45℃)以上的材料;
3)不用于渗出油污或溶剂的材料。
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查。
执行标准:gb/t14683-2003
保质期:9个月(<24℃).
“meishi m6478”neutral silicone sealant isaneutralcurehighperfomance grade silicone sealant:
1)not corrosion to the materials;
2)low shrinkage on curing;
3)keep elastic in low(-45℃) and high(+164℃) temperatures;
4)high grade soft,be able to bear oscillation;
5)suitable forglass,aluminummaterial,stone,concrete,brick,ceramic,plastic,non-structuralbonding and sealing;
6)in the lead, cadmium and other hazardoussubstancessixreachedtherohs directive, can be sold within theeu
directions:
1)construcation applycable between 5℃~40℃;
2)substrates should be solvent cleaned usingtwoclothesmethod;
3)cut the nozzle to desired opening at 45°angle;
4)fill the joint completely.
important:
1)please do material compatibility testing before use;
2)do not use in structural applicationsorwheresurfacetemperaturesexceed 45℃ for material safety;
3)incompatible oozing out oily or solvents.
precautions:
keep out of the reach of children!
avoid contact with eyes and skin!
in case of contact,flush with lotwater;ifstillindisposed,consultadoctor.
standars: gb/t14683-2003
storage: 9 months(<24℃).
深圳市宝安区沙井美氏康宁胶业销售部
高先生
13926500079
深圳市宝安区沙井