pl8-00型纸样压榨机（油压机）是造纸实验室用pl6型各种纸样抄取器的专用配套设备，是对尺寸不大于400mm×500mm的纸样进行压榨的实验设备，考虑到分析实验要求的特殊性，保证实验数据的准确性和可靠性，整个液压系统采用专用油缸及专用高保压元件，油泵停止工作后能长时间保持压力不变,因此开机时间短，工作时间长，超静音。
   本机的压榨除了满足qb/t3703-1999（制浆实验室纸页的制备+常规纸页成型器法）的要求外，还可以实施对纸样的压光实验。
   参数：
   ·工作压力：0－5mpa可调节
   ·公 称 力：15t
   ·施压面积：410mm×310mm(纸样尺寸)
   ·工作行程：300mm
   ·活塞直径：φ150
   ·齿轮泵工作压力：6.3mpa
   ·油箱容积：40l
   ·电机功率：1.5kw
   ·体积：1050mm×680mm×1940mm
   ·重量：668kg
   ·水源状况：无需水源
   ·关机后压力保持时间：大于4小时
-------------------------------------
pl8-00 hydraulic sheet press(oil hydraulic press)
    is used to press the wet test sheet. the machine is used with sheet-making apparatus.it can raise the density of objects, smoothness degrees, strength, or by reducing the water of objects be pressured .objects can be completed as pulp wet strength measurement(pressure 98kpa), thevarious type squeeze. press-smooth experiment but also could be used for other needs experiment, such as ceramics, cement squeeze of the semifinished materials,rubber vulcanization, the paper’spress-level.    pl8-00 oil hydraulic press is laboratory use of types pl6 handsheet former , which dedicated to supporting equipment taking into account the requirements of the experimentalanalysis of the specificity of the experimental data to ensure the accurary reliability of the hydraulic system and used to choose the large hydro-cylinder and high pressure components .after thefuel pump stop working. it will be prolonged to maintain constant pressure. so switch on the machine for a short period of time. long working time,less noise.    paraments:    pressure: 0~5mpa    pressure area: 400mm×500mm(paper’s max size)    nominal force: 15t    max work trip: 300mm    piston diameter: φ150mm    leaves pump work pressure: 6.3mpa    fuel tank capacity: 40l    motor power: 1.5kw     external dimensions :700mm×650mm×1700mm
';

---

咸阳泰思特试验设备有限公司
马毅
18992055590
陕西咸阳市咸阳市高新区高新一路