别称：凯士比蝶阀，ksb涡轮蝶阀
凯士比ksb boax-b涡轮对夹式蝶阀有弹性衬垫（epdmxc或丁腈k）。有杠杆，手动变速箱，电动或气动执行机构。对夹式车身（t1），半支耳式体（t2），全耳式车身（t4），u型截面机身采用扁平面（t5）。体类型t2，t4和t5是适于下行拆解和死端服务。阀瓣采用球墨铸铁或不锈钢。en，asme，jis可能的连接。
design
centered disc butterfly valve with elastomer liner (epdm xc ornitrile k). with electric actuator. semi-lug type body (t2),full-lug type body (t4), u-section body with flat faces (t5). bodytypes t2, t4 and t5 are suitable for downstream dismantling anddead-end service. valve disc made of nodular cast iron or stainlesssteel. en, asme connections possible. electric actuator by bernardcontrols: le/sd type series for on/off control or positioningthrough proportional control (4-20 ma).
application
engineering contractors, for water, crude oil and oils. shut-offand control duties in water management, water supply, watertreatment, drainage and irrigation.
features
1, small, lightweight, easy installation and maintenance, and canbe installed anywhere there.
2, the structure is simple, compact, 90 ° swing open and closequickly.
3, operating torque, energy saving.
4, the linear flow characteristics tend to adjust betterperformance.
5, the number of trials open and close as many as tens of thousandsof times, and long life.
6, to be completely sealed, gas leak test is zero.
7, choose different materials, applicable for a variety ofmedia.
凯士比ksb boax-b涡轮对夹式蝶阀产品特点
1、小型轻便，容易拆装及维修，并可有任意位置安装。
2、结构简单，紧凑，90°回转启闭迅速。
3、操作扭矩小，省力轻巧。
4、流量特性趋于直线，调节性能好。
5、启闭试验次数多达数万次，寿命长。
6、达到完全密封，气体试验泄漏为零。
7、选择不同零部件材质，可适用多种介质。
ksb turbine wafer soft seal butterfly valve is the preferredconventional pipeline butterfly, with simple structure, flowresistance coefficient, linear flow characteristics tend notstranded debris. and light weight, easy installation, the drivetorque is small advantages. pneumatic valve for cutting media canuse, but also for regulating the flow of media use. driving deviceaccording to user requirements, respectively, can be manual,electric, pneumatic and other means. use of different materials,parts, equipped with seals of different materials can be adapted todifferent media, working conditions, so that the cost andperformance to achieve the bestresults.ksb软密封涡轮对夹蝶阀是管线优先选用的常规蝶阀，具有结构简洁，流阻系数小，流量特性趋于直线，不会滞留杂物。且重量轻，安装方便，驱动扭矩较小的优点。气动蝶阀既可作切断介质用，又可作调节介质的流量用。驱动装置根据用户要求，分别可采用手动、电动、气动等方式。选用不同材料的零件，配用不同材料的密封圈，可适应不同的介质、工况，使成本与性能达到最佳效果。
德国凯士比KSB阀门（上海）代理商
黄经理
15001805101
莘松路958弄28号