patch cords are used to provide optical connectionfor fiber optic electronics. the use of the patch cord provides aquick and easy method for routing fiber patches in datacenters,head-ends, cellular hubs and central offices. the patch cord can beused in an interconnect or cross-connect path connectingthe incoming fibers to the electronic equipment and providingpatching within the fiber paths. patch cords include simplex,duplex and multi-fibers assemblies.
break-out patch cord
<!--[if!supportlists]-->ø  <!--[endif]-->the unit fiber is2.0 or 2.8 simplex cable.
<!--[if!supportlists]-->ø  <!--[endif]-->meets telcordiagr-326 core and rohs requirements.
<!--[if!supportlists]-->ø  <!--[endif]-->the connector couldbe sc, fc, lc, st, mu, e2000 etc.
<!--[if!supportlists]-->ø  <!--[endif]-->the cable could beg652d, g655, g657, om1, om2, om3, om4 etc.
<!--[if!supportlists]-->ø  <!--[endif]-->fiber count:4.6.8.12.24.48……
optical specification
     connector   
     sc,fc,lc,st,mu,e2000,mtrj
polishing
       sm/upc
     mm/pc
     sm/apc
insertion loss(max)
      ≤0.30db
      ≤0.30db
     ≤0.30db
return loss(min)
        ≥50 db
       ≥35 db
      ≥60 db
tensile strength   
      >70n
durability
     <0.20 db typical  change, 1000matings
repeatability
     ≤0.1db
storage , operating  temperature[°c]
      -40~+85
geometric specification (only for 3dinterferometer tested)
      connector
    connectors
    pc end-face
      apc end-face
radius of curvature
    sc/fc/st
10~25 mm
5~12 mm
lc/mu
7~25 mm
5~15 mm
apex offset
    ≤50 um
fiber spherical height
     +/- 50 nm
angular offset
     ------
     8°± 0.2°
ø     clean and scratch-free end face
       ø  proportional geometric test is applied to thenormal production.
       ø  100% interferometer check is available underspecial requirement.
length tolerance:
ø     0< *l<5cm
ø      1<*l<10cm
ø      10m< *l<lx1%(normal is 10cm)
  l: cable total length. *l:tolerance

---

深圳市峰霖光通信有限公司
Echo Geng
18366236387