结构形式structure type
移动桥式moving bridge
传动方式  transmission mode
直流伺服系统+ 预载荷高精度空气轴承dc servo motor & preload high precisionair-bearing
行程measuringstrokes（mm）
x
600
y
800
z
600
外部尺寸overalldimension(lwh)（mm）
l
1150
w
1735
h
2647
工作台面  work surface(mm)
x
783
y
1355
光栅分辨率linear scales systemresolution(um)
0.078
最大三维速度max.3dspeed(mm/s)
520
最大三维加速度max.3dacc(mm/s2)
1732
长度测量最大允许示值误差：maximum permissible error of indication of a cmmfor size measurement (mm)：
mpee (mm)=2.8+l/300
最大允许探测误差  
maximum permissibleprobing error (mm)：
mpep (mm)=3.5
主机重量machine weight（kg）
1074
承重max. part weight（kg）
500
测量机室的温度room temperature(°c)
18 - 22
机器周围环境的最大温度梯度
max. temperaturegradients
1°c/h，2°c/24h，1 °c/m
最小供气压力min. air pressure(mpa)
0.45
耗气量  air consumption(l/min)
180
电压voltage
220 v±10%
最大耗电量max. power consumption(w)
2000
电流current(a)
15
用电设备要求接地可靠：接地电阻小于4欧姆
a good earthground(less than 4ω) is required for reliableoperation of the electrical controls.
技术特点：
u 横梁与z轴采用表面阳极化航空铝合金，温度一致性极佳；并降低了运动部件的质量，减少测量机                                   在高速运行时的惯性  
cross beam and axis zare made of surface-anodized aerometal to improve thermal stabilityand reduce moving mass for faster setting.
u 三轴导轨均采用高精度自洁式空气轴承，运动更平稳，导轨永不受磨损
high-precisionself-cleaning air bearing is used on guideways of all the threeaxes with permanently wear-resistance and optimized kinematicsmovement.
u 三轴均采用高精度欧洲进口光栅尺，系统分辨率可达0.078um；同时采用一端固定，一端自由伸缩的  方式安装，减少了光栅尺的变形
all the three axes areequipped with the high-precision optical scales of germanheidenhain which make the system resolution reach up to 0.078um.and the installation method of one end fixed and the other endfreely extensible reduces deformation of optical sales.
u y轴采用整体燕尾式导轨，在降低机器重量的同时，有效消除了运动扭摆，保证了精度和稳定性
patentedprecision-machined dovetail guideway in axis y not only havelightened the machine weight but improved torsional stability,cmm’s accuracyand stability.
u 各运动轴均采用直流伺服驱动，确保运动的平稳和准确
all machine axes aredriven by dc servomotor to ensure cmm’s stability andaccuracy.
u x向采用精密三角梁专利技术，相比矩形梁和横梁，重心更低，质量刚性比最佳，运动更加可靠
x beam has adopted thepatented ultra rigid“tricision®” technology, with the result oflower center of gravity, better mass-rigidity ratio and morereliable motion than rectangular and cross beams.
u 软件为业界标杆的pc-dmisbasic (/pc-dmis cad)，功能强大，易学高效
powerful, easy-to-learnand efficient pc-dmis basic (/pc-dmis cad) software.
u 采用海克斯康为croma专业打造的idc-ⅰ控制系统，提高了机器的动态性能和测量精度
idc-i control systemspecially designed by hexagon for croma cmms improves the dynamicperformance and measuring accuracy..
4.测量软件softwaresystem：
pc dmisbasic
pc-dmis basic(dcc)通用测量软件，能够解决复杂的计量检测任务。该软件主要针对车间基层检测人员设计，能够使其在最短的时间内掌握该软件的使用。
pc-dmis basic (dcc) isthe universal metrology software, which can solve complex measuringtasks. this software is mainly intended for workshop basic-levelinspection operators, enabling them to master the softwareapplications in the shortest possible time.
这一具有强大检测功能的工业级计量软件提供了用户简易操作界面，帮助用户完成零件检测程序编程，测量程序初始化设定以及执行检测程序。运用先进的图形化报告功能，实现用户特殊的检测数据分析需求。pc-dmisbasic(dcc)软件的优势之一为其直观化的自学习功能，在不需要cad模型的情况下，实现用户零件检测编程。pc-dmis basic(dcc)软件独特的零件特征识别功能，针对不同测量点的探测，自动识别测量元素的类型(线、圆、圆柱，等等)。在完成工件特征检测之后，pc-dmisbasic (dcc)能够自动定义被测元素类型，提供所需信息和屏幕分析图形，这种动态图形通过被测几何元素之间拟合，实现被测工件的元素构造。
this powerfulindustrial metrology software features an easy-to-use operatorinterface that guides you through part programming, setup andinspection routine execution. advanced graphics reporting functionslet you configure inspection results to meet your specific dataanalysis needs. one of the features of pc-dmis basic (dcc) is itsintuitive self-teach capability that allows programming a part onthe cmm without the help of a cad file. the unique capability ofpc-dmis basic (dcc) is its ability to recognize the feature type(line, circle, cylinder, etc.) from the points taken to measure it.after the measurement of a feature is completed, pc-dmis basic(dcc) automatically defines the type of the element you measure,gives you the essential information, and draws the feature of thepart on the screen. and this dynamic drawing is useful for theoperator to realize the feature construction function through theintegration of the defined element with the otherfeatures.
u 具有中文版面和在线中文帮助
chinese language andchinese on line help available.
u 完善、可定制的直观化图形用户界面(gui)为不同软件应用水平的操作者提供了便捷的执行功能强大的    计量软件的方法
a fully configurable,intuitive graphic user interface (gui) provides users of all skilllevels with easy access to powerful measurementroutines.
u 点击鼠标，立即执行下述操作：完善的测头管理、零件坐标系管理和工件找正功能、检测报告、支持预览、特征构造、特征测量
one click startroutines for: probe qualification and management, part alignments,reports, preview assistant, feature construction and featuremeasurement
u 几何元素的评价，包括：直线度、平面度、圆度、圆柱度、圆锥度以及圆环和球面等。相对基准几何要素真实位置度的评价：平行度、垂直度、角度、对称度、位置度、同轴度、同心度、轴向跳动、径向跳动、轴向全跳动、径向全跳动
form evaluations ofgeometrical elements: straightness, flatness, roundness, cylinderform, conical form, torus form, and spherical form. true positionof an element with reference to the datum(s): parallelism,squareness, angularity, symmetry, position, coaxiality,concentricity, axial runout, radial runout, total axial runout,total radial runout.
u 可实现工件几何特征量的直接测量，并能够完成几何关系的计算、构造和形位公差的评价与分析
geometric featuresmeasurement, geometric relations calculation & construction,form and position tolerance evaluation.
u 互动式超级报告功能，增加了报告格式和数据处理上的灵活性
versatile reportingtemplates allow a new flexibility in report formatting and datahandling.
u ptb完全认证
full ptbcertification
u 符合iso标准的公差评判能力
follow the gd&trules of iso
5．测头系统probesystem ph10m自动分度测头：
ph10t是由英国renishaw公司专业设计生产的分度旋转关节，可实现720个可重复定位，从而可完成对工件的全方位检测。
ph10t isan indexable head from renishaw that connects the probe sensors tothe cmm quill. the ph10t can be repeatable oriented to any featureof a part.
技术参数(characteristics)
分度角a indexable axis a(俯仰 roll)
from 0°to105°, step of 7.5°
分度角b indexable axis b(旋转pitch)
±180°, step of 7.5°
重量 (weight)
645 g
定位重复性(positioningrepeatability)
0.5 µm
加长杆最大长度(max. extension bar)
300 mm
探针组styluskit：
实物图片
physical picture
规格specs
数量quantity
红宝石测针 ф1.0×10mm
1
红宝石测针 ф2.0×20mm
1
红宝石测针 ф3.0×20mm
1
红宝石测针 ф4.0×20mm
2
红宝石测针 ф4x10mm
1
sc2测针中心
1
测针加长杆10mm
1
测针加长杆20mm
1
测针加长杆40mm
1
s20扳手
1
合计total
11

---

昆山艾弗特计量仪器有限公司
张先生
18112660518
昆山市开发区夏荷路99号港龙财智国际大厦1座2025室（世茂广场对面）