sy-b1型自动分托机
automatic base separation machine sy-b1
1、 自动分托机主要用途及使用范围
1. main application and using ranges of automaticbase separation machine
本机主要适用于制药企业，特别针对水针生产包装过程中，安瓶印字前道工序，塑托分离，自动落托，通过传送带进入包装印字机，实现全自动包装流程。
our machine is mostly used in pharmaceuticalenterprises, especially in the packing process of squirt cutproduction. before the printing of the ampoules, the plastic baseis separatedautomatically and then falls onto the conveyor belt andthen into the packing printer. thus it achieves automated packingprocess..
2、 自动分托机的性能特点
2. the performance features of automatic baseseparation machine
主要性能
main features
1：自动上料，步进推托
automatically loading materials and steeper pushingbases
2：吸附送托
adsorption sending bases
3： 重叠盒托自动剔除
automatically rejecting overlapped box bases
4： 透明盒托检测
detection of transparent box bases
5： 无托自动报警
automatic alarm when without base
6: 分托机无托印字机自动停止下瓶 （与sy-aa型印字机联动时）
base separation machine and no-base printing machineautomatically stop to load bottles (interlocking with sy-aaprinting machine)
7: 印字机下瓶分托机自动给托 （与sy-aa型印字机联动时）
printing machine automatically loading bottles andbase separation machine automatically loading bases (interlockingwith sy-aa printing machine)
8: 印字机停机后分托机自动延时停机，印字机开机后分托机自动启动 （与sy-aa型印字机联动时）
base separation machine automatically delay to stopafter the printing machine stops, base separation machineautomatically starts after turning on the printing machine(interlocking with sy-aaprinting machine)
9: 分托机与印字机速度自动匹配（与sy-aa型印字机联动时）
speed of base separation machine and printing machineautomatically matching (interlocking with sy-aa printingmachine)
3、sy-b1型自动分托机技术参数
3. technical parameters of automatic base separationmachine sy-b1
1）适用规格：1-20ml药托 （含两个规格键，特殊规格定做）
applicable specification: 1-20ml drug base (includingtwo specification keys, customizing for special specifications)
2) 生产能力：1-20ml每分钟能达到130托
production capacity: 1-20ml, 130 bases per minute
3）耗电量：1.3kw
power consumption: 1.3kw
4）外形尺长(长×宽×台面高)米：1.75×1.35×(0.75-0.85)
overall dimension (length × width ×table-boardheight) (m): 1.75×1.35× (0.75-0.85)
5）总重量：260公斤
total weight: 260kg
6）压缩空气：不低于4kg/cm2
compressed air: not lower than 4kg/cm2
7）塑料药托要求：
requirements of plastic drug base:
1、边缘整齐规则、均匀 neat and regular edge
2、无破损变形 no damage or deformation
3、边缘吸合面不少于3.5mm edge of absorbing surface no lessthan 3.5mm
4、厚度不小于0.15mm no less than 0.15mm in thickness
5、重量不小于1.9g no less than 1.9g in weight
郑州市顺意药械有限公司
刘丙炎
18703897837
河南省新郑市新村镇107国道高新开发区