- 型号:Type 550ACD
- 材质:塑料
- 连接形式:外螺纹
- 加工定制:
- 公称通径:1/4NPT
- 密封形式:硬密封型
- 压力环境:高压
- 工作温度:真空
- 标准:
- 流动方向:换向
- 形态:柱塞式
- 零部件及配件:其他
- 类型(通道位置):
- 适用介质:洁净、干燥、无油仪表风,悬浮微粒小于40微米
- 用途:排气
简单介绍
type550精小型电气转换器(contralair)产品详细介绍 产品概述:tyte-550x精小型系列电气转换器的功能是将电流或电压信号转换成线性比例的气压信号输出。它外壳精小、安装方便和调整容易,在狭窄空间的使用场合中非常理想。这种经济型仪表可为执行机构、阀门、定位器和其它终端控制设备提供精密的空气压力调节。内置容积增大器,提供大流量性能,增加在苛刻应用场合下
type550精小型电气转换器(contralair) 的详细介绍
type550精小型电气转换器(contralair)
产品详细介绍
产品概述:
tyte-550x精小型系列电气转换器的功能是将电流或电压信号转换成线性比例的气压信号输出。它外壳精小、安装方便和调整容易,在狭窄空间的使用场合中非常理想。这种经济型仪表可为执行机构、阀门、定位器和其它终端控制设备提供精密的空气压力调节。内置容积增大器,提供大流量性能,增加在苛刻应用场合下的控制速度。多种接线和接口选择简单化了安装并降低安装所需时间。除了标准墙挂、盘装或管式安装,还可选择din轨道和集装组件。type-925多功能集装件可为3、5、10、15台type550提供共同的供压气源接口和单个关闭阀。
特性:
外形精确:特别适用于高密集型安装。
接线简单:导轨、接线端或din43650接头方式
多种安装选择:墙挂、盘装或管道或集装式安装
前后端都设有输入输出接口:提供灵活的气动连接方式
外部零点和满度调整:方使现场校验
应用:
典型应用场合为阀门执行机构,阀门气动定位器,风门和百叶窗执行机构,终端控制设备,继电器,气缸,
丝网张紧装置,离合器和刹车装置。行业应用包括石化,hvac暖通空调,能源管理,纺织,造纸,食品
半导体制造,印刷机械和医疗机械。
技术参数:
类型 标准型 零点可调型
输入 4-20ma 0-5vdc 1-5vdc 0-10vdc 1-9vdc 4-20ma 0-5vdc 1-5vdc 0-10vdc1-9vdc
输出 3-15、3-27、6-30、1-17、2-60、3-120 0-30、 0-60、 0-120
耗气量 1.8 scfh (0.05 m3/小时) 6.0 scfh(0.17 m3/小时)
流量 7.7m3/小时(1.7bar供压);20m3/小时(6.9bar供压)34m3/小时(10bar供压)20m3/小时(6.9bar供压);34m3/小时(10bar供压)
最大供压 100 psig (6.90 bar);150 psig (2-60, 3-120 psig) 100 psig (6.90bar);150 psig (0-120 psig)
精度 <±0.5%满量程 <±1.5%满量程
工作温度 -30℃~+65℃
供压灵敏度 <0.1% 满量程/1.0 psig (0.07 bar) <0.02% 满量程/1.0 psig (0.07bar)
t550x miniaturei/p, e/p transducer
accurateand economical electronic pressure control
<!-- instanceendeditable -->
<!--instancebegineditable name=product desciption -->thetype-550x is an electronic pressure regulator that converts avariable signal (current or voltage) to a proportional pneumaticoutput. its compact housing, accessible ports and easy adjustmentsprovide an ideal answer to applications that are space-constrained.this economical instrument provides precision air pressureregulation to actuators, valves, positioners and other finalcontrol elements. an integral volume booster provides high flowcapacity, increasing control speed in criticalapplications.
multiplechoices for wiring and porting simplify installation and decreasethe time required to do so. in addition to standard wall, panel orpipe mounting, optional din rail and manifold mounting kits areavailable. the controlair type-925 multifunction manifold providesa common supply port and individual shutoff valves for sets of 3,5, 10 or 15 units.
<!-- instanceendeditable -->
functionalspecifications
inputs
4-20ma,0-10 vdc, 1-9 vdc,0-5 vdc, 1-5 vdc
outputs
1-17 psig
0.07-1.20 bar
3-15 psig -
0.20-1.00 bar
3-27 psig
0.20-1.80 bar
6-30 psig
0.40-2.00 bar
2-60 psig
0.20- 4.00 bar
2-100 psig
0.14 - 6.70 bar
air consumption
1.5 scfh (0.11 m3/hr)
at mid range typical 4.5 scfh (0.16 m3/hr)
at mid range typical
supply pressure
note: supply pressure must be a minimum of 5 psigabove maximum ouput
100 psig (7.0 bar) maximum
60 psig (4.00 bar) maximum
for 1-17 psig output unit
130 psig (8.7 bar) maximum
flow capacity atmid-range 4.5 scfm (7.6 m3/hr)
at 25 psig (1.7 bar) supply
12.0 scfm (20.0 m3/hr)
at 100 psig (7.0 bar) supply
20.0 scfm (34.0 m3/hr)
at 150 psig (10.0 bar) supply
temperature limits
operating:
-40ąă to +160ąă f
(-40ąă to +71ąă c) storage:
-40ąă to + 200ąă f
(-40ąă to + 93ąă c)
loop load, i/p transducer
7.5 vdc @ 20ma
supply voltage, e/ptransducer
7-30 vdc, less than 3ma
signal impedance e/ptransducer
10 kilohms
performance specifications
accuracy, hysteresis, andrepeatability
+ or - 0.10% of span
deadband
0.02% of span
position effect
no measurable effect
vibration effect
less than ąŕ1.0% of span under the followingconditions: 5-l5hz @ 0.8 inches constant displacement; 15-500hz @l0g\'s
supply pressure effect
no measurable effect
temperature effect
+ or - 0.045% / of (0.07% /oc) of span
reverse polarity effect
no damage occurs from reversal of normal supplycurrent (4-20ma) or from misapplication of up to 60ma
rfi/emi effect
pending
physicalspecifications
port sizes
pneumatic...........l/4npt
electric...............l/2 npt
media
clean, dry, oil-free, air filtered to 40micron
mounting
direct wall, panel, 2 pipe, or din rail(optional)
materials
housing: chromate treated aluminum with epoxypaint. nema-4x (ip65). elastomers: buna-n. trim: stainless steel,brass, zinc plated steel
weight
13.0 oz. (0 4 kg)
珠海康宝莱仪表有限公司
程先生
13928091509
人民西路华达工业区8栋