foam concrete block features: 1. light, reducing the load on buildings: dry density is 300-1200 kg/m3 , the weight is 1/5-1/8 of ordinary concrete. 2. insulation, thermal insulation, excellentinsulation properties: its thermal conductivity is 0.06-0.16w/m*k.the sound insulation effect can reach 60db , using the wall which thickness is 24cm .so it meets the building's heat insulation,noise insulation requirements of exterior and splitting wall. 3. good compression performance: compressive strength is greater than 0.5mpa, the maximum intensity can achieve over 10.5mpa. 4. goodanti-seismic performance: the foam is a porous concrete block material having low flexibility, therefore it can disperse the impact very well, at the same time foam concrete block is lightweight andcan reduce the building loading effectively, the smaller building load, the stronger the anti-seismic capacity. 5. not crack, long life: foam concrete block won't appear cracking and hollowingphenomena. we brush without the use of interface agents. anti-aging properties is of prominent, long service life. 6. good water resistance: yx foam concrete material’s water absorption is lower than22%, significantly different from the other wall insulation materials . foam concrete block advantage: 1. small investment, scale is flexible. foam concrete block on the production conditions do notask for much, just the space and simple shed, from the simple production line, starting with a small amount of abrasive tools, small cost of inputs, gradually expanding. for the expansion of scale,increase production, additional production lines can be. 2.quick. equipment installation products can be a few days, seeing the income of that month, six months can be a cost-recovery. 3. use localmaterials, waste recycling, environmental protection. foamed concrete block raw materials are very extensive, we can choose the cement, riversand etc for main raw material, and also use localmaterials according to local raw materials, choosing fly ash and slag powders, lime, tailing sand etc, recycling waste materials for environmental protection. 4. flexible production, easy toimplement. foam concrete block can be produced by the fixed line, large-scale production, also can move production, construction site in production. 5.a line, just adjust mould tool, can producevarious size of product specifications. 6. can produce ultra-light block. current market similar products’ density is mostly 500-900kg/m3 , difficult to produce which density is lower than 500kg/m3,no products lower than 300kg/m3. however, foam concrete can produce ultra-low-density blocks of 100-300kg/m3 (mainly for the non load-bearing wall of sound insulation, sound-absorbing, building’sthermal protection and insulation parts). 7. conforms to the national environmental protection and energy saving industrial policies. this project pollution-free, production zero emissions,industrial waste, can enjoy preferential policies and related government subsidies.
北京中科亚信建材发展有限公司
张浩
13523400281
朝阳双桥东路318#