订货电话：0755－88865560
qq：505839923
user manual of grd-350
summary
features
1. chinese/english bilingual announcement free switch
2. super radar detection by high sensitive vco waveguide
3. current time display for fear of fatigue driving
4. band switch-each band alert can be switched off/on separately
5. 3 levels of radar sensitivity adjustable-medium/high/ultrahigh
6. urban/highway mode switch to eliminate false alerts
7. full band detection (x,k,new k,ku,ka,6/8f,vg-2,360度laser)
8. push button style power switch design
9. volume adjustable by pressing keys
notice
1. please install the detector properly following the user manual.a rule must be complied with is in whatever way the detector installed,it mustnˊt impair the motoristˊs view or it will increase the risk of an accident.
2. depending on you car,the power supply of the cigarette lighter socket would be continuous or can be switched on/off by your ignition switch.so before you leaving the car,confirm the status of the detector.do not leave the detector alone to be longtime running.this may lead to complete consumption of car battery or shorten the life of the detector.
3. before leaving your car, always remember to conceal your detector in a safe place. to avoid the possibility of break-in theft or distortion of shape due to the heat of longtime exposure in the sun(sometime the temperature in car would be a hundred celsius or above in summer)
4. do not disconnect the detector from pc in the whole process of updating. or this may result in the instability of system.
5. use standard 12v dc power supply to the detector. nothing should cover or overlie the detector while in use.
structure
item name note
1 radar antenna for receiving radar signals
2 mounting bracket slot to insert the kits of sucking cups or visor for mounting
detect or in car
3 laser lens receiving laser signal
4 360度laser lens 360度 laser receiver
5 bracket release button to lock or release the bracket to detector safely and
quickly
6 12v dc power socket toconnect the small end of the power cord for power
supply
7 speaker where the announcements and alert come from
8 cooling holes for heat dissipation of detector
9 function buttons 4 buttons of different functions,press single or 2
together to perform
10 display screen radar bands of frequency
accessories
enclosed in package:
1. detector
2. 12v dc car power cord
3. windshield mounting bracket
4. u shaped visor mounting kit
5. strong magnet
6. user manual
basic operation
getting-started
to begin using your detector.simply follow these steps below:
1. plug the small end of the power cord into the power socket at the right side of the detector,and plug the adapter of the other end into the carˊs cigarette lighter socket.
2. mount the detector on the windshield using the supplied windshield mounting brackets.
3. press down the red button at the adapter to connect power. after the red indicator lights up,the icons in display screen all flash with 2 beeps.then the announcement of current mode and sensitivity settings comes out and the detector comes into working condition.
4. adjust the audio volume by pressing m2 and m3 button on the top case of the detector
now the detector is ready to use. please read the manual carefully to fully understand the operation and features.
poer on/off
the detector operates on 12 volts dc power only. the adapter of the power cord end has fuse and a switch.
note: please connect power to detector after the engine starts,to prevent the over-current shock while igniting.
1. to power the detector, just plug the small end of power cord into the socket at the right side of the detector, plug the adapter of the other end into car cigarette lighter socket. then press down the red button of the adapter.
2. to power off,long press m4 button. in case of an abnormal condition,just cut the power supply.(not recommended)
installation
the manufacturer cannot anticipate the way the detector is installed. the ways showed bellow is most common;end users can make changes due to the real situation,but under the principles of never endangering driving safety.
1. mounting on windshield.
depress the bracket releasing button on the top of the detector,then slide the mounting kit with sucking cup into the slot at the central top of radar antenna end (see structure)until the kit is locked by the slot
mount the cups to windshield by pressing down to windshield glass. be sure to make the glass and cups both are clean. the mounting position should have a clear wiew of the front. bend the bracket if necessary,but slide the bracket off the detector before bending.
1. mounting on the sun visor
depress the bracket releasing button and slide the short end of the u the shaped bracket into the mounting slot until locked. then mount the detector the front edge of the visor board. make sure the radar antenna facing the front and bend the bracket if it grips the visor loosely.
2. mounting on dashboard
there is a strong magnet enclosed to mount your detector to the dashboard. tear the plastic paper of the red side and stick the magnet at a right place of the dashboard. simply put the detector on magnet. donˊt glue the magnet to dashboard if it is already strongly attracted.
note: no matter in whichever way the detector mounted,for the best detecting performance, never mount behind wipers, signs, strong metal films, etc.these will affect the receiving of radar and laser signal and result in the delay of critical warning time. the direction of the radar antenna should be horizontal forward of slightly down to the road,but never face to the sky or to the of the car.
program&detection
working condition shows as below:
volume setting
in working condition, press button m2 for audio volume increase and m3 for decrease. each press gets the announcement of current mode (urban or highway mode) and the number in display screen indicate level-totally 9 levels.
mode selection
in working condition, press button m1 to switch between city/highway mode. voice announces the current selected mode. if highway selected the icon hilluminates otherwise no indications.
note: in city mode, many false alerts will be eliminated
радар детектор grd-350 позволяет уверенно детектировать сигналы полицейских радаров:искра, радис, сокол, визир, аренаи т.д.антирадарgrd-350 имеет большой запас дальности срабатывания, удобное управление, вольтметр и множество других полезных функций
технические характеристики радар-детектора
- модель: grd-350
- цвет: черный
- 1,8 светодиодный дисплей
- дальность обнаружения: 600 ~ 1000 м
- угол обнаружения: 360 градусов
- встроенный громкоговоритель сигнализации
- язык: английский / китайский
- поддержка группы: х, к, ку, ка1, ka2, ka3, vg-2
- x-band: 10,42 ~ 10.62ghz
- к-диапазон: 23,9 ~ 24.3ghz
- ка-диапазон: 34,100 ~ 35.82ghz
- ku-band: 13,32 ~ 13.54ghz
- vg-2: 11.15mhz
- рабочее напряжение: dc 12v
1. английский язык оповещения
2. высокочувствительный датчик для обнаружения радиолокации.
3. точное отображение частоты
4. цифровой 9-ти диапазонный дисплей радар детектора
5. переключатель диапазонов. каждый диапазон предупреждения может быть отрегулирован по отдельности
6. 3 уровня чувствительности - средний/высокий/очень высокий
7. переключатель город/трасса для снижения количества ложных срабатываний
8. обнаружение во всех диапазонах (x, k, new k, ku, ka, new ka, 6/8f, vg - 2, 360laser)
9.кнопочный регулятор звука.
комплектация:
1. радар-детекторgrd-350
2. держатель лобового стекла на 3-х присосках
3. кронштейн крепления за солнцезащитный козырек
4. магнит для быстрой установки прибора на панель и также быстрого снятия прибора
深圳市惠速佳包装科技有限公司
13926577787
深圳福田区华强北路