●采用伺服马达驱动servo driver;
●攻牙尺寸一般为公制m1-m20 或对应unc/unf/bsw 等英美制的
螺纹成型加工 tapping sizes are metric m1-m20 or the corresponding
unc/unf/bsw sizes；
●不受冲床行程的限制。可以在冲床模具内使用也可以在生产线上
使用 there is no limite to punch stroke.it can be used in-die or in-line
processing；
●可以进行水平或垂直方向加工螺丝孔，也可以加工通孔或盲孔 the
tapping direction can be horizontal or vertical.also tap through holes or
blind holes;
●自动和手动安全操控与冲床同步，单次冲程结束时可检测丝锥
automatic and manual operation,punch processing are synchronously.
taps can be detected while a stroke finishing;
●配备先进的丝锥自动冷却润滑供油系统，最快速度达60 次／分钟
with advanced self-cooling and lubrication oil-feeding system,the fastest
speed up to 60times/m;
●领先筒夹技术使最小孔间距为13mm advanced sleeve barrel lock
technology minimize the distance between holes to 13mm；
●彩色液晶触摸屏控制界面，可以人性化登入及修改所有攻牙应用参
数 use the color touch screen controller to enter humanized and change
all the application parameter of tapping；
●实时显示攻丝状态，可记录攻丝次数 tapping status real-time
displayed,ability to record the tapphing number of times；
●安装快捷．独立的操控电箱使安装调试简便化 install quickly,
independent sevo operation units make installation and debugging
easily；
●可存储 45 种不同的攻丝方案 can save 45 kinds of different tapping
ways；
●配备攻牙过载保护系统 with torque overload protection system；
●电源：三相 220v50hz three-phase power supply: 220v50hz;
●若有特殊要求可订制 can be customized as special

---

东莞森川机械工具有限公司
熊志明
13794945736
东莞市石碣镇四甲第二工业区