pp2000/lexia-3 interface latest version, works for both citreonand peugeot!  5 cables !
dealer diagnostic scanner for comprehensive citroen and peugeotcars diagnostic. you can do all as a authorized dealer does.thisdiagnostics software allows you to perform complete diagnostics ofall from 1995 untill present models. diagnostics is performed viaobd-ii connector (which is located near steering wheel) or viamanufacturer-specific connector (only older cars, pre-2001).
supported functions
unlike other universal car scanner tools which only read faultcodes, this software performs nearly all the functions like theoriginal dealer diagnostic tool. our diagnostic interface containsk-line multiplexor, can-bus interfaces and sae j1850 bus (both pwmand vpw).
the following diagnostic functions are supported:
1.read identification
displays complete identification of control unit, e.g. part number,software/hardware version, manufacturer, etc...
2.read fault codes
displays all stored and pending fault codes with completedescription (e.g. rail pressure - too low pressure).
program supports report printing or copy to clipboard.
3.clear fault codes
this function clears all stored fault codes and other diagnosticinformation.
4.auto-scan (complete car scan/test)
detects all ecus (electronic control units) installed in car andreads all diagnostic fault codes.
5.measured values
program displays live data like engine speed, battery voltage,oxygen sensor, coolant temperature, etc. values can be displayed ingraph, 9 values at once, or full listing (all measured values).logging to file is also supported, which allows offlineanalysis.
6.actuator test
actuator test activates particular actuator (e.g. turn on fuelpump, lock/unlock wheel, lock/unlock doors, cut off fuel,etc..)
7.programming functions/adaptation
this feature is of great importance in all vehicles because systemslike engine control units, immobilizers, airbags, alarms, bodycontrol units, and some others, require you to perform reset orprogramming procedures after car repair is done, or evenconfiguration after replacing broken control unit.
hardware and software requirements
software requires at least intel celeron/pentium iii 400 mhz, 128mb ram, 50mb free hdd space and usb 1.1 port (usb 2.0 recommended)and microsoft windows 98 sr2/2000/xp with the latest service packinstalled.
if customer requires, we can prepare ready to work pc.
package includes:
main unit with extension obd2 cable
usb cable
software cd for lexia-3 version 45
software cd for pp2000 version 21
instruction for installation and activation for pp2000

---

深圳市车博通科技有限公司
彭喜
13544288851