- 品牌:其他
- 材质:球墨铸铁
- 型号:GP2000
- 连接形式:法兰
- 适用介质:蒸汽
- 公称通径:15
- 结构形式:薄膜式
- 压力环境:高压
- 工作温度:低温
- 标准:美标
- 流动方向:单向
- 驱动方式:手动
- 零部件及配件:配件
- 形态:蝶式
- 类型(通道位置):二通式
- 规格:
美国阿姆斯壮gp2000蒸汽先导式减压阀现货优势,厂家直销
上海阿姆斯壮armstrong阀门,美国armstrong减压阀,阿姆斯壮gp2000减压阀,阿姆斯壮gp2000蒸汽减压阀
gp-2000 系列先导薄膜式蒸汽减压阀
阿姆斯壮gp2000减压阀在其主阀操作部主要是使用活塞,但随着时代的要求,蒸汽系统的质量不断提高,也要求减压阀具有更高的控制性能。gp-2000蒸汽减压阀在其主阀操作部取代活塞,使用膜片,先导薄膜式提高cv值,对一次侧压力变化和二次负荷的变动也具有更高的控制性能。
阿姆斯壮gp2000减压阀特点
· 最大减压比高这20: 1 , 过去的两段减压现在用一段即可实现。
· 由于膜片大,又采用外部检测构造,可以控制稳定的二次侧压力。
· 由于cv值大,流量及控制能力的飞跃提高, 比通常的公称通径小 1~2个号码的产品也可使用。
· 由于阀门为单球形,其密封性提高,渗漏量极少。
. 可管理0.02mpa以下的低压。
gp-2000 externally piloted pressure-reducing valves
for steamservice
the gp-2000 is a high-performance,externally piloted reducing valve for large-capacity requirements.typical use is on intermittent service, including applications suchas heat exchangers, steam coils, rotating dryers, process equipmentand heating systems. with a 20:1 rangeability and high cv, thegp-2000 is reliable and accurate (+/-1% of pressure set point from5% to 100% of flow) over a long, trouble-free service life.hardened stainless steel working parts are renewable in-line. thegp-2000 is single-seated for dead-end service, and it is availablewith both npt (1/2–2) (15–50 mm) and flanged connections in 2–6sizes (50–150 mm).
上海秀通阀门有限公司
黄俊明
13564914691
南奉公路6111弄133号
减压阀型号大全 http://jianyafa.cn360cn.com