台湾鹰牌射梢切断及研磨机vec-300g，500g,600g
order no. cut-off precision angle cut-off sander lamina grinding sander rpm motor capa city weight size code no. inquriy
vec-300g
25mmø x 300mm ±0.01
25mmø x 90° ±0.01
1mm t x180mmø (hole) 31.8mmø
wa46k x 100 x 50 x 20
3600
3/4hp 110/220v 1 or 3 phase
vec-300g 300mm
105.4kgs(107kgs)(110kgs)
l430mm x w360mm x h500mm
1024-010
inquriy
vec-500g
25mmø x 300mm ±0.01
25mmø x 90° ±0.01
1mm t x180mmø (hole) 31.8mmø
wa46k x 100 x 50 x 20
3600
3/4hp 110/220v 1 or 3 phase
vec-500g 500mm
105.4kgs(107kgs)(110kgs)
l430mm x w360mm x h500mm
1024-011
inquriy
vec-600g
25mmø x 300mm ±0.01
25mmø x 90° ±0.01
1mm t x 180mmø (hole) 31.8mmø
wa46k x 100 x 50 x 20
3600
3/4hp 110/220v 1 or 3 phase
vec-600g 600mm
105.4kgs(107kgs)(110kgs)
l430mm x w360mm x h500mm
1024-012
inquriy
rods precision cutting-off and end surfacegrindingvec-300,500,600g射銷圓棒切斷及研磨機features1. during operation, the grinding sander may be micro adjusted andrepaired without changing its dimensions 2. the tightness of beltmay be automatically adjusted and controlled (the larger theresistance, the tighter the belt.) 3. the dimensions precision ofcutting off the length of working piece are not subject to theeffect of the difference of thickness of cutting – off sanderpiece. 4. the rapid chuck is used to hold the working quick, andø1-25mm is the same. 5. when operation, a shaft with two taperedends is used for transmission and characterized by high stabilitylow wearing rate and long life. 6. the rapid positioning rule is inthe unit of 20mm and provided with a micro rule (0mm to 25mm) ofwhich the zeroing point is the dimensions at the rapid positioningpoint. 7. the minimum of cutting lengt h is 60mm

---

东莞市长安贸钜机械贸易行
陈列建
18926824659
东莞市长安镇长荣国际五金广场D-5号