detailed product description chip beads have a high current with a high level of resistance chip inductor are small profile with low resistance high-current chip inductor wire wound chip inductor ceramic chip inductor ferrite chip inductor molding chip inductor multilayer chip inductor common mode chip choke wire wound chip power inductor low profile power inductor low dcr smd power inductor large-current smd power inductor smd magnetically shield power inductor shielded smd power chip inductor magnetic shielded surface mount inductor with high current rating low profile and shielded very effective in space-conscious applications low resistance to deep power loss minimum operating temperature: -40 to 105 degree celsius (contain heating coil) appearance inspection: no external defect by visual inspection terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of x, y with standing as below conditions terminal should not peeled off heat endurance of reflow soldering: 240 insulating resistance: over 100m ohms at 100v dc between wire and core dielectric strength: no dielectric breakdown at 100v dc for one minute between wire and core temperature characteristic: inductance coefficient (0 to 2,000) x 10-6/(-25 to +80 degree celsius) inductance deviation within ±5.0%, after 96 hours humidity characteristic: in 90 to 95% relative humidity at 40 ±2 and one hour drying under normal condition inductance deviation within ±5.0% after vibration for one hour vibration resistance: in each of three orientations at sweep vibration (10-55-10hz) with 1.5mmp-p amplitude
德微电子有限公司
刘芳贵
13421909629
东莞市长安镇霄边第二工业区